Volvo EC35 Скачать руководство пользователя страница 19

Страница: 19 / 140

Presentation

The USA Federal Clean Air Act

Normal Non-Road Engine Use

The Maintenance Instructions are based on the assumption that

this conventional machine will be used as designated in the Oper-

ator’s Instruction Manual and operated only with the specified fuel

and lubrication oils.

Non-Road Engine Maintenance

The non-road engine is of conventional design and any local deal-

er may perform the necessary non-road engine emission control

maintenance defined in this manual.

Volvo recommends that the purchaser use the service program for

the non-road engine, known as Preventative Maintenance, includ-

ing the recommended engine emission control maintenance.

In order to document that the proper regular maintenance has

been performed on the non-road engine, Volvo recommends that

the owner keep all records and receipts of such maintenance.

These records and receipts should be transferred to each subse-

quent purchaser of the non-road engine.

Service Performed By Your Local Dealer

Your local dealer is best qualified to give you good, dependable

service since he has trained service technicians and is equipped

with genuine original manufacturer´s parts and special tools, as

well as the latest technical publications. Discuss your servicing

and maintenance requirements with your local dealer. He can tailor

a maintenance program for your needs.

For regular scheduled service or maintenance, it is advisable to

contact your local dealer in advance to arrange for an appointment

to ensure availability of the correct equipment and service techni-

cian to work on your machine. This will aid your local dealer in ef-

forts to decrease service time on your machine.

Preventative Maintenance Program

To retain the dependability, noise level and exhaust emission con-

trol performance originally built into your conventional non-road

engine, it is essential that the non-road engine receive periodic

service, inspections, adjustments and maintenance.

Содержание EC35













































































































































Результаты поиска

Содержание EC35

Отзывы:

Volvo EC35, Руководство оператора, Страница: 19 / 140

Результаты поиска

Содержание EC35

Отзывы: