Volvo D4, Руководство оператора

Страница: 67 / 126

65
Maintenance. Engine general
Checking exhaust line
The exhaust line of drive installations must be in-
spected every year with respect to corrosion between
the hose (1) and the pipe (2).
WARNING! Risk of water entering. The exhaust
line must be inspected while the boat is on land.
In case of serious corrosion damage, the pipe
must be repaired or replaced with a new one.
To check: Undo the clamps (3) and (4) holding the
hose (1). Detach the hose. Check the contact surface
(5). In case of serious corrosion damage, the pipe
must be repaired or replaced with a new one.
Checking drive belts
WARNING! Stop the engine before commen-
cing maintenance work.
General
Check belt tension and condition regularly. If the belt
is too taut it can damage bearings and if it is too
loose it may slip.
Therefore, check the belt tension regularly. Check
and adjust after operation when the belt is warm.
IMPORTANT ! Always change a belt that ap-
pears worn or is cracked (belts working in pairs
must be replaced together).
Adjusting/changing drive belts.
The standard generator and water pump are driven
by a poly-V belt for optimum function and service life.
Change/tension the belt as follows:
1. Undo the bolts (1) on the tensioning roller brack-
et. Remove and change the belt if necessary.
2. Tension the belt to apply a torque of 70 Nm on
the tensioning roller square fitting (2). Secure the
tensioning roller with the bolts (1). The bolts must
be torque tightened to 50 Nm.
3. Undo the bolts (1) when warm and repeat the belt
tensioning procedure.
1.
2.
3.
4.
5.