Volvo D4, Руководство оператора

Страница: 51 / 126

49
Starting the engine
Starting method
Put the reverse gear/stern drive in neutral
Put the reverse gear in neutral by moving the control
lever(s) to neutral at all control positions.
Two lever control: Also check that the engine speed
lever is in the idling position.
Turn the ignition on
Turn the starter key to position I to switch the ignition
on. Stop cranking if the engine does not start with in
20 sek.
Check the warning lamps and LEDs
Each time the ignition is turned on, all bulbs and LEDs
are illuminated on the main control panel. Check that
all bulbs and LEDs function.
If the boat has more than one control panel, the lamps
on the other panel(s) are not checked until the control
panel(s) is(are) activated.
Lock the system.
If the boat has more than one control panel, the sys-
tem can be locked, so that the engine can only be
controlled from the activated control board. Press the
activation button for a second to lock the system. The
padlock sign lights up in confirmation.
Unlock the system by pressing the activation button
for one second. This can only be done from an acti-
vated control panel.