Vitrolux H
V2
Maintenance
Stand 5/12
Page 43 of 57
5.3.3 Y-axis
The lubrication nipple for the Y-axis is located in start position under the loading table.
Depending on the production series the nipple may be accessible, if the loading table is
pushed completely to the rear or the table is dismounted.
If the cover cap is not visible at the back position of the table, drag the table in all forward
and remove the 4 screws of the table. Remove the table and remove the plastic cap of the
lubrication nipple. After lubricating the shaft insert the plastic cap again and fix the table with
4 screws.
Figure 2:
Access lubrication Y-axis