Vitrolux H
V2
Product description
Stand 5/12
Page 31 of 57
3.5 Motor axis
The laser head can be moved in X, Y and Z direction.
The directions of motion are:
Z-axis (vertical: up +, down -) on the laser head
X-axis (horizontal, right +, left -) on the X-Y plate
Y-axis (horizontal, back +, forward -) on the X-Y plate
The movements are performed by the motor axes which enable high processing speeds and
high processing accuracy.
.
The size of the loading of table is 600 x375 mm,
The controllable area to engrave is
400 x 300 x 95 mm
:
Note
The directions are on the axles with signs referred to
Figure 5: Motor axis X and Z
