Vitrolux H
V2
Safety
Stand 5/12
Page 17 of 57
Risk of crushing
The laser system is equipped with strong motor drives to position the working table. There is
a risk of crushing limbs within the movement range of the laser head.
Warning
Never operate the laser with the protective equipment open (access flaps).
Risk of accident.
If operation with open protective equipment is necessary for maintenance, set-up or repair
work, the user must be particularly careful.
Warning
During operation with the protective equipment open, hands or other limbs must
not be held within the area of movement of the motor axes. Risk of accident.
Workpieces
Too high workpieces can damage the optics, control the height of scanner head. When
processing mirror glass watch the spezial instructions.
Caution
When processing mirror glass, the optics in the scan head (lens, mirror) can be
damaged by reflection. Put the mirror glass into a little diagonal position before
you begin to laser.
1.4 Intended use
The laser system is intended exclusively for processing material (inner engraving). The laser
operates as a source of a beam for the processing system. Only appropriate materials may
be processed.
Any other use is considered unintended use. The company Vitro Laser Solutions UG is not
considered liable for any damage resulting from unintended use.
The following are also considered part of the intended use:
observation of all information provided in the operating manual and manufacturer’s
documents supplied, and
maintaining all the maintenance and servicing conditions and intervals stipulated by the
manufacturer.
Observe all the applicable accident prevention regulations and other generally accepted
safety and health protection regulations.
