Vitrolux H
V2
Safety
Stand 5/12
Page 12 of 57
Caution
Do not open the laser head, scan head and diode module. Particles can enter
and damage the high performance optics. Opening these components annuls
rights to claims under the terms of warranty
In Maintenance, Set-up and Repair modes (the laser beam can be accessed) the Vitrolux C
laser system complies to Laser Class 4.
The laser system may only be operated in Maintenance, Set-up
and Repair modes under the following conditions:
1.
The proprietor must contract a specialist for laser protection in writing.
2.
The operator has submitted the requirements for operating laser equipment
complying to Laser Class 4 to the relevant localauthority department prior to
commissioning the
3.
The laser zone is clearly identified and the entrance to the laser zone is equipped
with a warning lamp.
4.
The operator and all those in the laser zone must wear protective goggles which
provide protection from direct, specular reflected or diffuse radiated laser beams. It is
recommended to wear protective gloves.
Warning
Prevent the possibility of unauthorized persons accessing the laser zone.
Risk of accident!
Warning
If the beam guide is not mounted, the laser beam escapes at the side
of the laser head. Risk of accident.
Note
The order numbers for appropriate protective goggles is provided
in Chapter 8 Special Equipment.
Danger from laser beams
The laser beams radiated by the Vitrolux laser system are (in)visible. They can cause severe
damage to the eyes and cause skin burns.
Diffuse leakage radiation or reflected radiation can also be dangerous.
Warning
Never expose yourself to direct or reflected laser beams.
Never look directly into the laser beams. Risk of injury.
