Vitrolux H
V2
Troubleshooting
Stand 5/12
Page 47 of 57
6. Troubleshooting
Contents
The laser system is comprised of various components which may show signs of wear or
cause faults during the course of time.
This chapter contains information to help locate faults and eliminate them, as well as some
notes on the possible.
Organization
___________________________________________________________
6.1 General information
6.2 Errors
6.2.1 System can't be switched on
6.2.1 „Power“ button does not work
6.2.3 laser does not engrave
6.2.4 Software works incorrectly
6.2.5 Software massage „Door open“ in closed door
6.2.6 Engraving moved in the glass
6.2.7 Motives with defects always in the same place
6.2.8 Motives with streaks or strips
6.2.9 Motive rare to see
6.3 Changing the lens
6.4 Replacing the laser diode module
___________________________________________________________
Objectives
This chapter contains information to help locate faults and explains corrective measures that
are within the scope of your possibilities.
Note
Only use original spare parts obtained from Vitro Laser Solutions UG.
