Vista SmartDisc 10IP, Руководство по установке

Страница: 52 / 74

5 Description of "Site archive" features
Vista SmartDisc 10IP 51
[D&T], Login failed, [u], [v], [w],
[y]
The user indicated in field [u] tried to establish a
connection with log in order indicated in field [w] to
SmartDisc 10IP (0=first, 1=second, etc.). This
attempt failed due to unknown user and/or wrong
password. Depending on connection mode and
configuration, the following additional information
can be displayed.
Field [v] = connection established by:
■ IM = internal Modem ( ISDN Card )
■
EM = external Modem (or other dial up devices)
■ NW = Network
■
NM = Null modem
■ UB = USB
■
UN = Unknown
Field [y] = Connection cause:
■
R = Receiver dial-up
■ A = Alarm call triggered by SmartDisc 10IP
■
S = Service call triggered by SmartDisc 10IP
(every 24 hours)
no no
Status messages to the 34 pin terminal block
[D&T], Control input [x] closed The control input indicated in field [x] has been
closed.
yes no
[D&T], Control input [x] opened The control input indicated in field [x] has been
opened.
yes no
[D&T], Alarm input closed The alarm input has been closed. yes no
[D&T], Alarm input opened The alarm input has been opened yes no
[D&T], Alarm enable input closed The arm/disarm input has been closed yes no
[D&T], Alarm enable input
opened
The arm/disarm input has been opened yes no
[D&T], Control input [x] closed The Aux input indicated in field [x] has been closed. yes no
[D&T], Aux input [x] opened The Aux input indicated in field [x] has been opened. yes no
[D&T], V.out input closed The control output V.out has been closed. yes no
[D&T], V.out input opened The control output V.out has been opened. yes no
Status messages to the serial control
[D&T], External command:
XXXX,OK
The serial command XXXX was successfully
processed (XXXX = four-digit command)
yes no
[D&T], External command:
XXXX,ERROR
The serial command XXXX was not successfully
processed (XXXX = four-digit command)
yes no
Log file entry Description Optional
Error
relay