Vista SmartDisc 10IP, Руководство по установке

Страница: 21 / 74

3 System description
20 Vista SmartDisc 10IP
Pin assignment
terminal block
20 R1 [Common] Relay Device configuration allows you to allocate the following functions to
any relay:
■ Manual remote control with SmartControl, SmartControl PRO
or SmartControl CLIENT distinguishing between switch and
pushbutton functions
■ Switching to at least one SmartControl receiver unit with active
online connection
■ Error relay
21 R1 [normally open] Relay
22 R1 [normally closed] Relay
23 R2 [Common] Relay
24 R2 [normally open] Relay
25 R2 [normally closed] Relay
26 Aux in2 Control
input
Auxiliary input 2: Reserved
27 Ground Common ground for all inputs of type "control input"
28
to
32
Control in 6-10 Control
input
Camera control inputs for external contact triggered recording and/or
selective dial-up to a SmartControl receiver unit for video inputs 6 to
10. These control inputs can be used for event recording as well as for
event optimised continuous recording.
33 Speaker + Audio You can connect a 1 W/8 Ohm loudspeaker on this output to listen to
the audio on the property being monitored.
The output is protected against overload, but not against shorts. Using
a speaker with matching maximum output is recommended.
34 Speaker – Audio
Pin
Labelling/
description
Type Function
⊥
17 1
34 18