Visioneer ONETOUCH - FOR WINDOWS, Руководство пользователя

Страница: 12 / 78

S
CANNING AND
C
ONFIGURING
O
NE
T
OUCH
11
• To edit the configuration, click the
Edit
button.
Edit the settings and click OK .
Note: Your scanner comes with a number of configurations pre-set at the factory. To ensure that your
scanner will always have a set of correct scan configurations, do not delete the pre-set configurations. We
also recommend that you keep those configurations locked so they are not inadvertently deleted. That
way, you will always have the factory-settings available. If you do delete or edit them, and want to get the
factory pre-sets back again, you will need to uninstall then re-install your scanner.
In the Scan Configuration Properties window, the Scan Settings , Page Settings , Advanced Settings , and
Redaction Settings tabs are always available. When the Kofax VRS module is installed, the VRS Settings
tab will also be available for all destinations.
Based on the selected destination, additional settings tabs may also be available. If you see one of these
additional settings tabs please refer to the appropriate section, as listed below, for instructions on
configuring these destination specific options.
•
Use the Storage Options tab to choose the storage folder for scans sent to the Transfer to Storage
destination, as described on page 27.
• Use the Device Settings tab to configure Printer or Fax destinations, as described on page 35.
• Use the PaperPort tab to choose the destination folder, in the Nuance PaperPort application, as
described on page 37.
• Use the SharePoint tab to specify a SharePoint site, user credentials, and destination folder, as
described on page 39.
• Use the FTP Settings tab to specify an FTP site, user credentials, and destination folder, as described
on page 42.
• Use the SMTP Configuration tab to specify an SMTP server, user credentials, and destination email
address, as described on page 45.
T
HE
S
CAN
S
ETTINGS
T
AB
On the Scan Configuration Properties dialog box, type a name.
Mode
—Select a scanning mode:
If the configuration
is locked, click the
lock to unlock it.
The icon becomes a
key.
Type a new name for
the configuration.
Select the scan mode
and drag the slider to set
the resolution.
Drag the sliders to set
the Brightness and
Contrast.