Visioneer OneTouch 9750, Руководство пользователя

Страница: 149 / 160

142
V
ISIONEER
9750 S
CANNER
U
SER
’
S
G
UIDE
can make it appear worn and will cause issues feeding paper. See
“Cleaning the Automatic Document Feeder” on page 136 for cleaning
instructions.
Problem: The ADF won’t feed pages properly. How can I fix it?
A dirty or worn ADF pad assembly or dirt on the roller can cause
documents to feed in skewed at an angle, or multiple pages to feed at
the same time. Try cleaning the roller first. See “Cleaning the Automatic
Document Feeder” on page 136. If that doesn’t solve the problem, the
pad assembly may need to be replaced. It is user-replaceable. See
“Replacing the ADF Pad Assembly” on page 137 for the steps to replace
the pad. You received a replacement pad in the original scanner box, and
you can also order a new one. See “Visioneer 9750 Scanner Parts List”
on page 148 for the ordering number.
Problem: The paper jams about halfway through the scan. How can
I keep this from happening?
Check the Flatbed glass to make sure no items are on it when you scan
from the ADF. Multiple items placed on the Flatbed glass will raise the
lid slightly, thus preventing the pages feeding through the ADF from
touching the glass. When that occurs, the pages are unable to feed back
out of the ADF and the pages can jam.
Problem: The motor runs but doesn't feed the paper. How can I fix
it?
Make sure the paper is securely seated in the ADF so the paper rests on
the rollers. The paper sensor that initiates the rollers to grab the paper
may be engaged, but the paper may not be fully in the ADF tray so the
rollers cannot grab a page to feed it through.
Problem: The scans from the ADF are always crooked. What do I
need to do to get the scans straight?
Make sure to align the paper guides to the edges of the paper. If you are
scanning small items that are smaller than the paper guides’ minimum
adjustment, scan these items on the Flatbed glass instead.