Viper XPT 6000, Руководство пользователя

Страница: 51 / 67

45
7.4 Appendix D
– Image Armor CLEANING SOLUTION:
Description:
Image Armor CLEANING SOLUTION is designed to help
keep your Viper pretreatment machine running cleaner
and smoother. It helps break down the solids in the
pretreatment solution that can clog nozzles, spray
heads and tubes that can cause poor system
performance.
The Image Armor CLEANING SOLUTION is a non-
flammable, biodegradable, environmentally friendly, has low VOC, zero GWP, non-ozone
depleting, halide free and non-corrosive. Regular cleaning with the CLEANING SOLUTION will
help provide better, more consistent and even spray patterns over the life of your machine.
Use:
The Image Armor CLEANING SOLUTION is designed to be re-circulated through your Viper XPT-
6000 via the H2O Fluid IN and OUT ports. It is highly suggested that you utilize a 1 quart
container as your re-circulation fluid holder.
How to Use the Image Armor CLEANING SOLUTION
11. Empty the Viper of pretreatment by running a Fluid Empty routine per on screen instructions.
12. Place the water IN and OUT fluid lines into the 1 Quart container of Image Armor CLEANING SOLUTION.
13. Run a Fluid FILL routine as per the Viper instructions.
14. To fully clean and maintain the Viper, run 3-5 cycles of the fluid FILL routine as per Step 3 above.
15. Empty the Viper of Image Armor CLEANING SOLUTION by running a Fluid Empty routine.
16. Place the water IN line back into a clean container of distilled water.
17. Place the water OUT line back into your waste water container.
18. Run two Fluid FILL routines per the Viper instructions using distilled water to remove the residue of the
Anti-Venom from the Viper’s lines, pump and spray heads.
19. Empty the water from the Viper using the Fluid EMPTY routine on the Viper.
20. You are ready to re-introduce pretreatment into the Viper and start pretreating.
Viper XPT-6000