Viper XPT 6000, Руководство пользователя

Страница: 13 / 67

Viper XPT-6000
7
4. Another tube will connect to the Pre-Treatment 1 IN quick connect. Make sure that the
tube labeled IN is inserted into this port.
5. The third tube will connect to the Water Out/Waste quick connect.
6. The fourth tube will connect to the Pre-Treatment 1 OUT quick connect. The fluid out
tube for the pre-treatment has a clear check valve on one end. This end has a shorter hose tube
connected to the check valve. The SHORT end of the hose is what is placed into the pre-treatment
container.
CAUTION: REVERSING THIS FLUID OUT HOSE CAN RESULT IN A PRESSURE
BUILD UP THAT CAN BLOW THE CHECK VALVE OFF THE TUBE CONNECTION
POINT OR A TUBE CAN BURST IN THE SPRAY CABINET. USE EXTREME CAUTION
WHEN HOOKING THIS UP.
7. Take the two supplied white rigid plastic tubes and thread the Water In and Pre-treatment 1 In
tubes through the white rigid plastic pipe. (The and ports on the back of the
machine)
8. Connect a clear filter to each of the two tubes you just put through the white rigid plastic pipe.
(The Water In and Pre-treatment 1 In ports).
9. Place the pre-treatment IN and OUT tubes in your pre-treatment solution containers. Place the
water IN tube in a container with water, and the water OUT in a waste container*.