Viper XPT 6000, Руководство пользователя

Страница: 15 / 67

Viper XPT-6000
9
Here’s a quick guide to the Valves and how to use them.
The valve selector on the top allows you to select which fluid you would like to allow the Viper to use or
pull into the delivery system. There are 4 options for this valve:

Water In (used for cleaning the Viper)

Pre-Treatment Fluid 1

Pre-Treatment Fluid 2

None (allows air into the system to flush all fluids out of the fluid delivery system in the Viper).
The valve selector on the bottom is the return fluid (fluid out of the Viper) selector. This valve setting will
allow the fluid that is not used in the system to be returned to an external container. There are 3 options
for the bottom valve:

Waste Water Return

Pre-Treatment Fluid 1 Return

Pre-Treatment Fluid 2 Return
Normally you will position the top and bottom valve selectors to the same input/output selection choice.
To Select a Fluid:
1. Turn the top selector to the fluid of your choice.
2. Turn the bottom selector to the fluid of your choice.