Viper XPT 6000, Руководство пользователя

Страница: 20 / 67

Viper XPT-6000
14
3.1 Control Screen
The control screen is the main screen of the Viper’s
touch screen interface will load when the Viper is
powered on. This screen allows for change the
fluid laydown, the length of the spray, and zone of
the shirt that pre-treatment will be applied to. You
can also navigate to any of the menus by pressing
the tabs at the top of the screen.
3.1.1 Fluid Laydown
The fluid laydown option changes the amount of liquid that is sprayed. To change fluid laydown,
you can press the numerical display which will allow you to manually enter a fluid laydown value or
you can press one of the preset “buttons”.
If you press the numerical number display,
enter a fluid laydown value between 17 and
100 (17 being less, 100 being more). Press
enter to activate the value and close the popup.
Fluid laydown values control the amount of
fluid that is sprayed. For more information on
choosing the laydown value that is appropriate
for your application, please see section 4.2.1,
Choosing Fluid Amounts.
3.1.2 Spray Length
The spray length determines the length down the platen that fluid is sprayed. To change the spray
length, press the numerical value. On the popup input screen, enter the desired spray length in
inches. Press enter to activate the value and close the popup.
Figure 3.1
Figure 4.1
Figure 3.1.1