Viper XPT 6000, Руководство пользователя

Страница: 37 / 67

31
4. Repeat with other nozzles.
5.3.2 Machine Body Maintenance
To prevent pre-treatment buildup on the Viper, clean the machine’s body once per day, minimum . If the
unit is being used heavily and any pre-treatment fluid is building up on the deck or other body
components make sure to wipe these areas down before they get a chance to leak or drain into the
mechanical areas of the Viper.
Items needed: Image Armor CLEANING SOLUTION
4.
Lift the “garage door” hood of the Viper.
5. Using the Image Armor CLEANING SOLUTION, thoroughly clean all accessible surfaces of the
machine. Make sure to clean up any pre-treatment residue.
6. With the platen in the full out position you can remove the platen and reach back into the Viper to
clean the plastic in those areas. This will prevent buildup of residue inside the machine keeping
the machine running smoother.
Figure 5.3.3 – Replace the tip and black nut that holds the tip
in place.