Viper XPT 6000, Руководство пользователя

Страница: 35 / 67

29
2. Using the Image Armor CLEANING SOLUTION, thoroughly clean all accessible surfaces of the
machine. Make sure to clean up any pre-treatment residue.
3. With the platen in the full out position you can remove the platen and reach back into the Viper to
clean the plastic in those areas. This will prevent buildup of residue inside the machine keeping
the machine running smoother.
5.3 WEEKLY PREVENTATIVE MAINTENANCE
5.3.1
Nozzle/Spray Tip Maintenance
If you have a persistent problem with a spray tip nozzle pattern you may need to remove the tip to try to
clean it more thoroughly or to remove any contaminants that might be clogging the tip.
Items needed: Toothbrush, distilled water, Image Armor CLEANING SOLUTION
1. Remove nozzle from spray head one at a time by loosening black nut. Be careful when removing
the spray tip as there is black O-ring that seals the tip to the spray head solenoid. Sometimes the
O-ring will come off with the spray tip. Other times it will remain in the spray solenoid. Be very
careful to NOT LOSE THIS O-RING OR THE HEAD WILL LEAK WHEN APPLYING PRE-
TREAMTMENT.
Figure 5.3.1 – Removing the spray tip nut. Be careful the o-ring doesn’t come out along with the nozzle
tip.