Viper 320HV, Руководство по установке

Страница: 30 / 34

3 30 0
© 2004 Directed Electronics, Inc. Vista, CA
3 3 IIG GN NIITTIIO ON N--CCO ON NTTR RO OLLLLEED D D DO OO OR R LLO OCCK K//U UN NLLO OCCK K O ON N//O OFFFF:: When turned on, the doors will lock three seconds after
the ignition is turned on and unlock when the ignition is turned off. If the ignition key is turned on while the
vehicle door(s) are open, the door(s) will not lock.
4 4 A ACCTTIIV VEE//P PA ASSSSIIV VEE LLO OCCK KIIN NG G:: If passive arming is selected in Feature 1, then the system can be programmed to
either lock the doors when passive arming occurs, or only lock the doors when the system is armed with the
transmitter. Active locking means the system will not lock the doors when it passively arms. Passive locking
means that the system will lock the doors when it passively arms.
5 5 D DO OO OR R LLO OCCK K P PU ULLSSEE D DU UR RA ATTIIO ON N:: Some European vehicles, such as Mercedes-Benz and Audi, require longer lock
and unlock pulses to operate the vacuum pump. Programming the system to provide 3.5 second pulses will
accommodate door lock interface in these vehicles. The default setting is 0.8 second door lock pulses. See
Mercedes-Benz and Audi - 1985 and Newer (Type E Door Locks section) diagram.
6 6 D DO OU UB BLLEE P PU ULLSSEE U UN NLLO OCCK K O OFFFF//O ON N:: Some vehicles require two pulses on a single wire to unlock the doors. When
the double pulse unlock feature is turned on, the H2/2 BLUE/BLACK wire will supply two pulses instead of a
single pulse. This makes it possible to directly interface with double pulse vehicles without any extra parts.
N NO OTTEE:: The second unlock output feature (H3/1 BLUE wire) is not available if the double pulse
unlock feature is turned on.
7 7 SSTTEEA ALLTTH H CCO OD DIIN NG G
™ ™
TTEECCH HN NO OLLO OG GY Y O ON N//O OFFFF:: This system features Stealth Coding
™ Technology as an option. Stealth
Coding ™ Technology is a feature that uses a mathematical formula to change the system’s code each time the
transmitter and receiver communicate. This makes the group of bits or "word" from the transmitter very long.
The longer the word is, the easier it is to block its transmission to the unit. Disabling the Stealth Coding ™
Technology feature lets the receiver ignore the Stealth Coding ™ Technology part of the transmitted word. As a
result, the unit may have better range with Stealth Coding ™ Technology off.
8 8 D DO OO OR R SSEEN NSSO OR R B BY YP PA ASSSS CCH HIIR RP P O ON N//O OFFFF:: This feature controls the error chirp that is generated if the system is
armed with the door trigger active. This is useful in vehicles that have a long dome light delay after the door
has been closed. If the system is armed before the dome light has turned off, the security system will generate
the door trigger error chirp. If this error chirp is not desired, use this feature to disable the door open error chirp.
If the bypass chirp is turned off, no bypass chirp will be generated, even if a door is accidentally left open.
9 9 D Do ou ub bllee P Pu ullssee LLo occkk.. Selectable 2 pulse door lock output to operate vehicle equipped with factory “deadbolt”.
Will have similar operation to that of the Double Pulse Unlock feature, but will perform the functions on the Lock
wire as opposed to the Unlock wire