Viper 320HV, Руководство по установке

Страница: 25 / 34

© 2004 Directed Electronics, Inc. Vista, CA
2 25 5
ttrraannssm miitttteerr//rreecceeiivveerr lleeaarrnn rroouuttiinnee
The system comes with two transmitters that have been taught to the receiver. Use the following learn routine to
add transmitters to the system or to change button assignments if desired.
The Valet ® /Program switch, plugged into the blue port, is used for programming. There is a basic sequence to
remember whenever programming this unit: Door, Key, Choose, Transmit and Release.
1. O Op peen n aa d do oo orr.. (The GREEN wire, H1/5, or the VIOLET, H1/7 must be connected.)
2. K Keeyy.. Turn the ignition on. (The H1/9 YELLOW switched ignition input must be connected.)
3. CCh ho oo ossee.. Press and release the Valet ® /Program switch the number of times necessary to
access the desired channel, then press the switch once more and Hold it. The siren will
chirp and the LED will blink the number of times corresponding to the channel that has
been accessed.