Viper 320HV, Руководство по установке

Страница: 28 / 34

2 28 8
© 2004 Directed Electronics, Inc. Vista, CA
ssyysstteem m ffeeaattuurreess lleeaarrnn rroouuttiinnee
Many of the features of this unit are programmable. They can be changed whenever necessary through this learn
routine. The Valet ® /Program switch, plugged into the blue port, is used together with a programmed transmitter
to change the settings.
TTo o een ntteerr tth hee ffeeaattu urree lleeaarrn n rro ou uttiin nee::
1. O Op peen n aa d do oo orr.. ((The GREEN wire, H1/5, or the VIOLET, H1/7 must be connected.)
2. IIg gn niittiio on n.. Turn the ignition on, then back off. (The H1/9 YELLOW switched ignition input
must be connected.)
2. CCh ho oo ossee.. Within 10 seconds, press and release the Valet ® /Program switch the number of
times corresponding to the feature number you want to program (see the Features Menu
section of this guide). Then press the switch once more and hold it.
The LED will flash and the siren will chirp to indicate which feature you have accessed.
4.
TTrraan nssm miitt.. While H HO OLLD DIIN NG G the Valet
® /Program switch, you can select the desired features
setting using the remote transmitter. Pressing the lock icon transmitter button while
H HO OLLD DIIN NG G down the Valet/Program switch will program the feature to the LED ON (default)
setting. The siren will chirp once. Pressing the unlock icon transmitter button while
H HO OLLD DIIN NG G down the Valet/Program switch will change the setting to the LED OFF setting.
The siren will chirp twice.
5. R Reelleeaassee.. Release the Valet ® /Program switch.
TTo o aacccceessss aan no otth heerr ffeeaattu urree::
You can advance from feature to feature by pressing and releasing the Valet ® /Program switch the number of times
necessary to get from the feature you just programmed to the feature you wish to access. For example, if you
just programmed Feature 1 and you want to program Feature 2:
1. Release the Valet ® /Program switch.
2. Press and release the Valet/Program switch once to advance from Feature 1 to Feature 2.
3. Press the Valet ® /Program switch once more and H
HO OLLD D it.
4. The siren will chirp two times to confirm that you have accessed Feature 2.
TTo o eexxiitt tth hee CCo od dee LLeeaarrn niin ng g,, d do o o on nee o off tth hee ffo ollllo ow wiin ng g::