User's Manual
Visitor T30 C-DR
Page 32/74
[File: 218899-01-01-B.docx]
6
TRANSPORT
Tilting hazard.
Use and transport on inclined floors.
► Don’t use the equipment on floors with inclination higher than 5°.
► Don't move the equipment on floors with inclination more than 10°.
Danger of damages and injuries during the equipment movement.
The uncontrolled movement of the equipment could cause damages to the operator, patient and
personnel in proximity of it.
► The equipment must be moved only in the condition called “transportation” and with all the
blocks of the movements activated.
1. Monobloc - collimator group arm (A) lowered up to
the click of the safety lock (B)
To be sure that the lock of the movement is
active, turn the knob with the arrow in the direction of
the red point.
2. Monobloc-collimator group (A) in vertical position
on both axes (B) (C).
Close the clutches so that the monobloc-
collimator group does not move. Check that all
movements locks are properly released and safe.
3. Release the parking brake (D).
4. Move the equipment by using only the transport
handle (E).
5. To overcome obstacles or small drops, press with the
foot on the pedal for the tilting and, at the same time,
pull the transport handle.
