Visitor T30 C-DR
User's Manual
[File: 218899-01-01-B.docx]
Page 11/74
2.4
Protection against explosions
This device mustn't be used in presence of explosive gas or fumes, such as some kind of gaseous
anesthetics. Do not use disinfectant spray flammable or potentially explosive. The use of this
equipment in an unsuitable environment can cause fires or explosions.
2.5
Fire safety
• Do not use this equipment in areas where there is a risk of fire.
• Do not cover the ventilation openings while the equipment is turned on.
• For electrical or chemical fires use only fire extinguisher marked as suitable for such uses. The use
of water or other liquids in an electrical fire can cause physical injuries or even death.
• Before trying to extinguish the fire, the safety measure to be taken is to separate the equipment
from other electric power sources and from all other sources in order to reduce the risk of electrical
shocks.
2.6
Electrostatic discharge (ESD)
Always resort to static procedures, protections and appropriate products before opening or during
the handling of the equipment. This equipment includes electrostatically sensitive components.
Non-compliance with ESD procedures may cause damages to the components. Such damages to the
components are not covered by any warranty.
The electrostatic discharge (ESD) can cause a remarkable voltage that could cause damages to printed circuit
boards (PCB) or to other equipment components.
Electrostatic discharge (ESD) damages can accumulate and can initially not be visible, such as a hardware
failure, but can reduce performances. Therefore, it is recommended to use proper ESD handling procedures.
ESD can be due to low humidity or to the use of electrical equipment on carpets, bedding and clothes.
