26
XX207-20-03 Rev 611 MPD-980DN-O Camera Dome
ViconNet Configuration
Adding Camera to the ViconNet System
The I-Onyx MPD-980DN-O camera will not automatically show up on the site list. It must be added to the
ViconNet system. Unlike non-ViconNet cameras, this camera does not require a third party license to be
used in the system.
Note: I-Onyx MPD-980DN-O cameras only need to be added once in the Nucleus for the entire system.
1. From the ViconNet
Main
window, click
. The
Setup Site Selection
window is displayed,
showing a list of all currently connected transmitters and Workstations.
2. Select the Nucleus for which you want to configure a camera and click
. The
System
Settings
window is displayed.
3. From the System Settings window, select the
button. The following
screen will display.
