4
XX207-20-03 Rev 611 MPD-980DN-O Camera Dome
Mounting to a Wall
1.
Attach the supplied alignment sticker to the wall
.
2.
Using the 10 circles on the sticker, drill 4 pilot holes symmetrically on each side into the wall. Insert the
four supplied plastic anchors into the holes.
3.
Insert the four supplied screws through the four holes on the bottom base and into the corresponding
holes in the wall; secure the bottom base to the wall surface.
4.
Feed the cables through hole A or B; if using hole B, remove the rubber plug with a screwdriver.
5.
Secure the camera base to the bottom base with three supplied screws.
