7
XX207-20-03 Rev 611 MPD-980DN-O Camera Dome
If using the screw terminal for digital input for alarm sensors, follow the diagram below. Digital output is not
supported by ViconNet.
Lens Settings
In the Video Settings menu, select Fixed
“Iris mode”
initially to adjust lens; this fixes the shutter to adjust
focus. After the lens is focused correctly, then select Indoor or Outdoor for the environment.
Adjusting the Camera Position
The camera dome provides a 3-axis mechanism for precise positioning of the camera’s angle of view.
1. Loosen the pan adjustment screw and turn the lens module left and right. Upon completion,
tighten the screw.
2. Loosen the tilt adjustment screws on both sides of the camera and turn the lens module up and
down. Upon completion, tighten the screws.
3. Loosen the rotation adjustment screw and turn the lens to adjust the image orientation. Upon
completion, tighten screw.
