SV Router FC-FC 3 – Installation and User Guide – Sun Release
42
Caution !
You must type <Enter> when you return to this screen to save
any changes. At that point, the SV Router will reboot. If you
reboot the router before saving your changes the second time,
the changes will not be saved. If no changes are made, the SV
Router will not reboot, and you will be returned to the main menu.
Fibre Channel Host-Side Configuration Menu
The following menu screen (Figure 3-7) is presented when you type
H
to configure the host
side of the SV Router FC-FC 3. The current configuration is shown when you first enter the
menu, and it can be viewed at any time by typing
?
.
Figure 3-7
Host-Side Configuration Menu
•
Select
P
to toggle between loop mode and point-to-point mode.
•
If loop mode is in effect, type
L
to change the Loop ID. Enter a number at the prompt:
0 to 125 represent hard Loop IDs, and 126 is the default soft Loop ID.
If a hard Loop
ID value is chosen, the FC configuration menu will display the AL_PA that
corresponds to that ID (see Figure 3-8).
Содержание FC-FC3
