Vicom Systems FC-FC3, Инструкция по установке и эксплуатации

Страница: 86 / 102

SV Router FC-FC 3 – Installation and User Guide – Sun Release
72
051 Can not erase FLASH memory. Replace router.
053 Unauthorized cabling
configuration. • Check cabling. Ensure server/
switch connects to host-side
and storage connects to
device-side of router.
• If necessary, clear SAN
Database.
• If necessary, cycle router
power.
• If necessary, Import SAN zone
configuration.
054 Unauthorized cabling
configuration. Check cabling.
057 Too many HBAs attempting to log
in. Check cabling.
060 SAN database successfully
cleared. No action needed.
126 Too many Routers in SAN. • Remove the extra router.
• Cycle router power.
130 Heartbeat connection between
routers is down. • Correct problem.
• Cycle the power on the
follower router.
400-599 Device side interface driver errors:
409 FC device-side type code invalid. • Cycle power
• If problem persists, replace
router.
434 Too many elastic store errors to
continue. Elastic store errors
result from a clock mismatch
between transmitter and receiver,
and indicates an unreliable link.
This error can also occur if a
device in the SAN loses power
unexpectedly. • Check for faulty component
and replace.
• Cycle the power on the
follower router.
462 Too many hosts tried to log in. Check cabling.
502 Too many ports logged in with
fabric. Check cabling.
539 Too many SV Routers in the SAN • Remove extra router.
• Cycle the power on the
follower router.
542 Target has too many LUNs Check subsystem setup
Code Number Cause Corrective Action
Table B-1
Service Codes