Vicom Systems FC-FC3, Инструкция по установке и эксплуатации

Страница: 39 / 102

Building The SAN
25
Adding Additional SANs
Up to 32 SANs per active daemon.
1. "Configure the SV Router" on page 10 .
2. Configure the storage. See "T3 StorEdge Setup" on page 16 .
3. Edit the Config File by creating additional SignOn paths for the additional SANs. The
following example depicts the Config File edited for three SANs managed by one daemon.
The daemon is setup for redundancy. This example uses the same IP addresses used in
"Multiple SAN Configuration" on page 28 .
Example for Primary Server
SAN1r0 = {
internet_path = 100.1.2.24;
};
SAN2r0 = {
internet_path = 100.1.2.44;
};
SAN3r0 = {
internet_path = 100.1.2.64;
};
Example for Secondary Server
SAN1r1 = {
internet_path = 100.1.2.28;
};
SAN2r1 = {
internet_path = 100.1.2.48;
};
SAN3r1 = {
internet_path = 100.1.2.68;
};