Vicom Systems FC-FC3, Инструкция по установке и эксплуатации

Страница: 40 / 102

SV Router FC-FC 3 – Installation and User Guide – Sun Release
26
4. Configure failover settings for additional SANs.
Example: Primary and Secondary Daemon Config File
SAN1 = {
name = SAN1;
PrimaryDaemon = 100.1.2.32, SAN1r0;
SecondaryDaemon = 100.1.2.35, SAN1r1;
};
SAN2 = {
name = SAN2;
PrimaryDaemon = 100.1.2.32, SAN2r0;
SecondaryDaemon = 100.1.2.35, SAN2r1;
};
SAN3 = {
name = SAN3;
PrimaryDaemon = 100.1.2.32, SAN3r0;
SecondaryDaemon = 100.1.2.35, SAN3r1;
};
Note: The secondary server’s configuration is identical to the primary server’s.
5. Start the primary daemon.
6. Using the
setmasterdaemon
command, restore the primary daemon for each SAN.
This will ensure that the same primary daemon is used for each SAN. See "Setting the
Master Daemon [setmasterdaemon]" on page 156 for more information.
Example
#svengine/sdus/setmasterdaemon -d SAN1r0
#svengine/sdus/setmasterdaemon -d SAN2r0
#svengine/sdus/setmasterdaemon -d SAN3r0
7. To configure the secondary daemon (located in the secondary server), repeat steps 1-6
above.
Example of a Successful Failover
List of Daemons
ID Host Slic SlicNumber AssignedDaemon DaemonStatus
-------------------------------------------------------------------------
0
100.1.2.32
SAN1r0 0 Primary Daemon error
1
100.1.2.35
SAN1r1 0 Secondary Daemon OK
2
100.1.2.32
SAN2r0 0 Primary Daemon OK