Vicom Systems FC-FC3 Скачать руководство пользователя | Manualshive

Страница: 3 / 102

background image

iii

FCC EMC Statement (USA)

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy, and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case the user will be required to correct the
interference at his own expense. The end user of this product should be aware that any changes or
modifications made to this equipment without the approval of Vicom Systems could result in the product not
meeting the Class A limits, in which case the FCC could void the user's authority to operate the equipment.

The device certification tests were conducted with generically available computer systems and shielded
cables, such as those you received with your product. Changes or modifications not expressly approved by
Vicom Systems could void the user's authority to operate the equipment.

Cables used with this device must be properly shielded to comply with the requirements of the FCC.

IEC EMC Statement (Worldwide)

This is a Class A product. In a domestic environment, this product may cause radio interference, in which
case the user may be required to take adequate measures.

EMC Statement (Canada)

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.

Cet appareil numérique de la Classe A respecte toutes les exigences du Règlement sur le matériel brouilleur
du Canada.

Spécification ATI Classe A (France)

DECLARATION D'INSTALLATION ET DE MISE EN EXPLOITATION d'un matériel de traitement de
l'information (ATI), classé A en fonction des niveaux de perturbations radioélectriques émis, définis dans la
norme européenne EN 55022 concernant la Compatibilité Electromagnétique.

«
1
2
3
4
5
...
»

Содержание FC-FC3







































































































Отзывы:

Нет отзывов

Похожие инструкции для FC-FC3

Бренд: D-Link Страницы: 5

Бренд: D-Link Страницы: 2

S5120V3-EI Series

Бренд: H3C Страницы: 54

Бренд: H3C Страницы: 116

Бренд: dixell Страницы: 4

Бренд: WaiLan Страницы: 27

Бренд: EnGenius Страницы: 3

FieldPoint FP-3000

Бренд: National Instruments Страницы: 118

Бренд: Network Critical Страницы: 200

NetVanta Analog Modem Dial Backup Interface Module

Бренд: ADTRAN Страницы: 2

Бренд: CAME Страницы: 32

Бренд: Planet Страницы: 2

Бренд: Vista Страницы: 93

Бренд: Supero Страницы: 54

Бренд: Intellinet Страницы: 12

Бренд: Allied Telesis Страницы: 128

Бренд: Proxim Страницы: 65

Бренд: M86 Security Страницы: 512

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды