Viavi Xgig, Руководство пользователя

Страница: 85 / 468

Xgig Tuning and Equalization Chapter 3, Getting Started with Xgig TraceControl
Xgig Analyzer User’s Guide 71
Steps to Apply Equalization
1 In TraceControl, right-click the port level LEDs shown in the domain created for the 6G SAS/
SATA blade or system, and select
Change Equalization Settings
.
2 You will be prompted to enter the user name and password for the chassis web page. The
default user name is
JDSU
and the default password is
JDSUsnt
. If the defaults have been
changed, check with your system administrator for the correct user name and password.
3
A web page will appear with drop down boxes for each port at all speeds, 1.5000 Gbps, 3.0000
Gbps, and 6.0000 Gbps. An example of the web page is shown below. The Xgig chassis name
appears in the title bar, and the slot number for the chassis is displayed at the top of the web
page. If you have not selected all the ports on the blade to be included in the domain, the
unselected ports will be grayed out and therefore not configurable in the web page.
4
Press the
Submit
button after the appropriate settings have been selected from the drop-down
boxes. This results in an update on the chassis with your requested settings, but does not
update the hardware. A page will display showing the settings you have selected. Press
Go
Back to return to the Equalization page.
5
Perform the Tuning procedure. Whenever you press the
Tune
button, the tuning process will
automatically apply both the Tuning results and the latest Equalization settings at the end of
the tuning process.
Once the equalization setting(s) have been submitted, the settings will persist across an Xgig
chassis reboot or power cycle. Unless a device is replaced or the transmitter settings are changed,
the Equalization and Tuning settings will remain valid. If a device is replaced or the transmitter
settings are changed, then the Equalization and Tuning settings should be reset.