Vertiv
|
NetSure™ 2100 Series -48 VDC Power System Installation Manual (IM582138000)
|
Rev. C
77
Procedure
1.
To Select a Sub-Menu:
From the MAIN SCREEN, press the ENT key to go to the MAIN MENU.
From the MAIN MENU, press the UP and DOWN keys to highlight the desired sub-menu.
Press the ENT key to enter the selected sub-menu.
2.
To Select a User and Enter a Password (Settings Menus):
To select a User, use the UP and DOWN arrow keys to select a User previously programmed into the
controller. Press ENT to select the User. Note that only Users programmed into the controller are
shown. Users are programmed via the Web Interface. The default User is admin.
To enter a password, use the UP and DOWN keys to choose a character. Press ENT to accept and
move to the next character. Continue this process until all characters are entered. Press ENT again to
accept the password. Default Password: 640275.
3.
To Change a Parameter:
Press the UP and DOWN keys to move up and down the list of parameters.
Press ENT to select the parameter.
Press the UP and DOWN keys to change the parameter.
Press ENT to make the change. Press ESC to cancel the change.
4.
shows the menu navigation for some basic settings. Refer to the separate Mini Control Unit
Manual (UM1M831ANA) supplied with your power system for complete Local Display menus.
