SIP Configuration
3-14
Chapter 3: Using the LCD Configuration Menu
Edge 5000 Installation / Configuration Guide
SIP Configuration
The SIP Configuration selection establishes parameters for each line appearance, SIP User Id,
allowing the IP Phone to register and, if required, subscribe for the line appearance with the
appropriate call server. Additionally, general Voice over IP (VoIP) characteristics are assigned,
which affect characteristics associated with all lines.
Lines are assigned to the IP Phone flexible buttons in consecutive order from the first button.
For each line, the following parameters are available:
-
call server IP address
-
authorization Id and password
- line
type
- special
line
attributes
As a default, the maximum number of lines is two and only the first two line appearances are
available using the LCD Menu. When the IP Phone requires more than two (2) lines, use the
Web Manager or configuration file to change the number of lines and line parameters.
NOTE
:
For proper operation, assign the first line button as an appearance of the user's line. For features
where the IP Phone uses one-button line access such as Speed Dial, the IP Phone employs the
first line button.
SIP Configuration, Line Parameters
Assign parameters in this section for each SIP line appearance.
Call Server Address
The Call Server Address is the IP address or FQDN of the IP Phone host call server. Different
call servers can be defined for each line.
To assign the Call Server address:
•
Press the Settings (
) button. If the LCD Menu is locked, use the unlock
procedure. Refer to
page 3-4
.
•
Press the
digit, or move the cursor to 2.SIP Configuration using the
[Next]-[Previous] softkeys and press the [OK] softkey.
•
Press the
digit, or move the cursor to 1.Line Configuration using the
[Next]-[Previous] softkeys and press the [OK] softkey.
•
Enter the line button number or move the cursor using the [Next]-[Previous] softkeys
and press the [OK] softkey to select a line button.
•
Press the
digit, or move the cursor to 1.Call Server Address using the
[Next]-[Previous] softkeys and press the [OK] softkey.
Release 1.0
September 2010
Содержание Edge 5000
