Vertical Edge 5000, Инструкции по установке/настройке

Страница: 111 / 168

QoS Configuration 4-33
Chapter 4: Using Web Manager for Configuration
Edge 5000 Installation / Configuration Guide
Jitter Buffer Configuration
A jitter buffer stores incoming packets to allow for re-sequencing out-of order packets. The
Jitter Buffer configuration controls the size of the buffer used. The minimum, normal and
maximum delays expected can be changed. Using larger values produce less packet loss as
the IP Phone waits longer to receive packets before processing. Note that large values may
delay voice packet processing and smaller values may produce more packet loss but quicker
voice packet processing.
To modify the QoS configuration:
• Select the parameter and either enter a new value or select a value from the
drop-down menu.
• When complete, select to load the new values in the IP Phone memory.
NOTE
:
Modifications made to the IEEE 802.1p/Q configuration require a reboot of the IP Phone. When
you leave the menu, you will receive a Reboot notice. The IP Phone must reboot to utilize the
new values entered.
If CDP is enabled, manual VLAN settings are overwritten during a reboot of the IP Phone. To
use manually defined VLAN settings, disable CDP, see
page 4-7 .
Release 1.0 September 2010