background image

Call Waiting

3-47

Chapter 3: Using the LCD Configuration Menu

Edge 5000 Installation / Configuration Guide

Move to another parameter with the navigation buttons and continue the session or 
press the Settings ( 

) button to exit the configuration session.

Call Waiting

With Call Waiting configured, while on a call the IP Phone alerts the user of an incoming call.  
The line button flashes to indicate the new call, and an optional beep tone is delivered over the 
existing conversation, see 

“Call Waiting Tone” on page 3-47

.  In addition, the LCD displays the 

incoming caller id during the ring signal so you know who is calling before you interrupt the 
current call.

If Call Waiting is disabled, the IP Phone will reject the new call.  The call server configuration 
determines routing of the incoming call.

To enable/disable Call Waiting:

Press the Settings ( 

) button.  If the LCD Menu is locked, use the unlock 

procedure.  Refer to 

page 3-4

.

Press the 

 digit, or move the cursor to 4.Call Preferences using the 

[Next]-[Previous] softkeys and press the [OK] softkey.

Press the 

 digit, or move the cursor to 2.Call Waiting using the [Next]-[Previous] 

softkeys and press the [OK] softkey.

Press the [Yes] softkey to enable Call Waiting, or press the [No] softkey to disable Call 
Waiting.

Move to another parameter with the navigation buttons and continue the session or 
press the Settings (

 ) button to exit the configuration session.

Call Waiting Tone

While off-hook, the IP Phone can provide a tone over the existing conversation to indicate a call 
waiting.  To receive the tone, Call Waiting must also be enabled.  Refer to 

“Call Waiting” on 

page 3-47

.

To enable/disable Call Waiting Tone:

Press the Settings ( 

) button.  If the LCD Menu is locked, use the unlock 

procedure.  Refer to 

page 3-4

.

Press the 

 digit, or move the cursor to 4.Call Preferences using the 

[Next]-[Previous] softkeys and press the [OK] softkey.

Press the 

 digit, or move the cursor to 3.Call Waiting Tone using the 

[Next]-[Previous] softkeys and press the [OK] softkey.

Press the [Yes] softkey to enable Call Waiting Tone, or press the [No] softkey to 
disable Call Waiting Tone.

Release 1.0

September 2010

Содержание Edge 5000









































































































































































Отзывы: