Vertical Edge 5000 Скачать руководство пользователя

Страница: 56 / 168

Time Configuration

3-34

Chapter 3: Using the LCD Configuration Menu

Edge 5000 Installation / Configuration Guide

•

Press the [Yes] softkey to enable DST Auto Adjustment, or press the [No] softkey to
disable DST Auto Adjustment.

•

Move to another parameter with the navigation buttons and continue the session or
press the Settings (

) button to exit the configuration session.

Time Format

The format of the LCD time display can be set to display time in the 12-hour format or 24-hour
format. In addition, the LCD time display can be disabled.

To set the display format for time:

•

Press the Settings (

) button.

•

Press the

digit, or move the cursor to 3.Phone Settings using the

[Next]-[Previous] softkeys and press the [OK] softkey.

•

Press the

digit, or move the cursor to 6.Time Configuration using the

[Next]-[Previous] softkeys and press the [OK] softkey.

•

Press the

digit, or move the cursor to 4.Time Format using the [Next]-[Previous]

softkeys and press the [OK] softkey.

•

Press the [Next]-[Previous] softkeys to select the Time Format and press the [OK]
softkey to set the format.

•

Move to another parameter with the navigation buttons and continue the session or
press the Settings (

) button to exit the configuration session.

NOTE

An asterisk,

, displays in front of the current selection.

Date Format

The format of the LCD date displays in the one of the formats below:

MM/DD (01/22)

DD/MM (22/01)

DD Month (22 Jan)

Month DD (Jan 22)

None

To set the date display format:

•

Press the Settings (

) button.

•

Press the

digit, or move the cursor to 3.Phone Settings using the

[Next]-[Previous] softkeys and press the [OK] softkey.

•

Press the

digit, or move the cursor to 6.Time Configuration using the

[Next]-[Previous] softkeys and press the [OK] softkey.

Release 1.0

September 2010

Содержание Edge 5000









































































































































































Результаты поиска

Содержание Edge 5000

Отзывы:

Похожие инструкции для Edge 5000

Бренды по названию

Популярные бренды

Vertical Edge 5000, Инструкции по установке/настройке

Результаты поиска

Содержание Edge 5000

Отзывы:

Похожие инструкции для Edge 5000

Бренды по названию

Популярные бренды