Vertical Edge 5000, Инструкции по установке/настройке

Страница: 41 / 168

SIP Configuration, Line Parameters 3-19
Chapter 3: Using the LCD Configuration Menu
Edge 5000 Installation / Configuration Guide
In addition, the status of an active or held private line call displays only at the associated phone.
Only the active user may transfer or conference calls on a private line.
A BLA appears at line buttons of more than one phone. All phones with an appearance can
access incoming and held calls on the BLA and receive status information for the call. Note for
proper operation, assign the line as a BLA in the call server as well as the IP Phone.
A DSS line incorporates three functions associated with the needs of an answering position:
- DSS - while the line is idle, the button calls the associated extension.
- BLF- the Busy Lamp Field LEDs of the line button display the line status.
- Call Coverage - incoming calls on the line are answered using the button.
Assign a DSS line as a BLA or BLF in the call server and as a DSS line in the IP Phone. When
using the Broadsoft BLF function, the DSS Line type is assigned in the IP Phone. Also, for the
BLF function, a URL must be defined, see
Using Web Manager for Configuration
.
Each line button employs LEDs to indicate status of the line as shown below.
* When the LCD displays information for a line, such as when an incoming call first rings,
the LED color is orange otherwise, the LED color will be green.
To assign the Line Type:
• Press the Settings ( ) button. If the LCD Menu is locked, use the unlock
procedure. Refer to
page 3-4
.
• Press the digit, or move the cursor to 2.SIP Configuration using the
[Next]-[Previous] softkeys and press the [OK] softkey.
• Press the digit, or move the cursor to 1.Line Configuration using the
[Next]-[Previous] softkeys and press the [OK] softkey.
• Enter the line button number or move the cursor using the [Next]-[Previous] softkeys
and press the [OK] softkey to select a line button.
• Press the digit, or move the cursor to 8.Line Type using the [Next]-[Previous]
softkeys and press the [OK] softkey.
Incoming call Orange* LED flashes at 60 ipm, fast flash
Line in use at this phone Orange* LED On
Call held at this phone Orange* LED flashes at 30 ipm, slow flash
BLA/DSS in use at another phone Red LED On
BLA/DSS Call held at another phone Red LED slow flash
DSS incoming call Red LED flashes at 60 ipm, fast flash
Line not registered w/server Red/Orange LED flashes color, red to orange at 30 ipm
Release 1.0 September 2010