Vertical Edge 5000, Инструкции по установке/настройке

Страница: 21 / 168

Provisioning the Edge 5000 2-7
Chapter 2: Installing the IP Phone
Edge 5000 Installation / Configuration Guide
Provisioning the Edge 5000
The Edge 5000 phones support 'plug and play' installation employing the automated
provisioning process described in
Appendix F
. After connecting to the LAN, desktop PC and
power, refer to "Connecting the IP Phone" starting on page
2-1
, the IP phone retrieves LAN
settings including IP address, subnet mask and default gateway address from the local DHCP
(Dynamic Host Control Protocol) server.
In addition, the IP phone requests address information for the provisioning server where
configuration and software files are maintained. The IP phone downloads the configuration
and, if required, software files from the provisioning server. When complete, the IP phone
automatically registers and subscribes for SIP call services using the information from the
configuration files. Refer to
Appendix D
for more details.
IP5000 series phones incorporate means for manual configuration when the automated
process is not fully available. As a minimum, the IP5000 phones require the information below
for proper operation. When not assigned through the automated provisioning process, manual
entry of the below parameters is required for proper operation.
- Line 1 SIP parameters including:
• Line 1 SIP call server IP address
• Line 1 Name (SIP user id)
• Line 1 Authentication user name
• Line 1 Authentication password
In addition using static IP addressing requires manual entry of the following IP network
configuration data.
• IP address of the IP phone
• Default gateway address
• Subnet mask
Two methods are available for manual configuration.
• The LCD Configuration Menu permits local configuration using the dial pad and
softkeys, see
Chapter 3
.
• The second method employs the IP5000 Web Manager, which allows access to the IP
phone configuration using a Web browser, see
Chapter 4
.
• Manual configuration permits assignment of all parameters required to gain full
operation of the IP phone. However, manual configuration is time consuming and is
intended only to augment the automated process and to allow customizing user
preferences.
Release 1.0 September 2010