SIP Configuration, General Parameters
3-24
Chapter 3: Using the LCD Configuration Menu
Edge 5000 Installation / Configuration Guide
RTP Start Port
When a SIP call is established, Real-Time Transport Protocol (RTP) packets transport media
and digitized voice. The port used for RTP packets is usually 23000, but a different port may
be defined.
To assign an RTP Start Port:
•
Press the Settings (
) button. If the LCD Menu is locked, use the unlock
procedure. Refer to
page 3-4
.
•
Press the
digit, or move the cursor to 2.SIP Configuration using the
[Next]-[Previous] softkeys and press the [OK] softkey.
•
Press the
digit, or move the cursor to 7.RTP Start Port using the [Next]-[Previous]
softkeys and press the [OK] softkey.
•
Input the RTP Start Port using the dial pad and press the [OK] softkey to save your
entry.
•
Move to another parameter with the navigation buttons and continue the session or
press the Settings (
) button to exit the configuration session.
NOTE
:
Changing the RTP Start Port requires a reboot of the IP Phone; when you leave the menu, you
will receive a reboot notice. The IP Phone must reboot to utilize the new values entered.
Proxy Registration
If Proxy Registration is set to [Yes], the IP Phone will register with the appropriate call or proxy
server upon initial power-up, during a reboot and at periodic intervals based on the timer
defined in
“Register Expires” on page 3-25
.
To enable Proxy Registration:
•
Press the Settings (
) button. If the LCD Menu is locked, use the unlock
procedure. Refer to
page 3-4
.
•
Press the
digit, or move the cursor to 2.SIP Configuration using the
[Next]-[Previous] softkeys and press the [OK] softkey.
•
Press the
button, or move the cursor to 8.Proxy Registration using the
[Next]-[Previous] softkeys and press the [OK] softkey.
•
To enable registration, press the [Yes] softkey or, to disable SIP registration, press the
[No] softkey.
•
Move to another parameter with the navigation buttons and continue the session or
press the Settings (
) button to exit the configuration session.
Release 1.0
September 2010
Содержание Edge 5000
