VAT 650 AP Series, Инструкции по установке, эксплуатации и обслуживанию

Страница: 42 / 79

Installation, Operating & Maintenance Instructions
Series 650 DN 100-
250 (I.D. 4“ - 10”), DeviceNet
VAT Vakuumventile AG, CH-9469 Haag, Switzerland
Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com
266341ED
2012-07-13
42/79
3.11 DeviceNet interface
3.11.1 Assembly objects
Note: Factory default assemblies are: Input assembly 3 / Output assembly 8
Number Type Composition
2)
[number of data bytes]
1)
3
Input
EXCEPTION STATUS
PRESSURE
POSITION
[1]
[2] or [4]
[2] or [4]
4
Input
EXCEPTION STATUS
PRESSURE
SETPOINT
3)
[1]
[2] or [4]
[2] or [4]
5 Input
EXCEPTION STATUS
PRESSURE
SETPOINT
3)
POSITION
[1]
[2] or [4]
[2] or [4]
[2] or [4]
7 Output
SETPOINT
3)
SETPOINT TYPE
[2]
[1]
8 Output
MODE
SETPOINT
3)
SETPOINT TYPE
[1]
[2] or [4]
[1]
13
(Dh)
Input
EXCEPTION STATUS
EXCEPTION DETAIL ALARM
EXCEPTION DETAIL WARNING
[1]
[15]
[15]
14
(Eh)
Input
EXCEPTION STATUS
PRESSURE
POSITION
VALVE CLOSED / OPEN CHECK
4)
[1]
[2] or [4]
[2] or [4]
[1]
100
(64h)
Input
EXCEPTION STATUS
PRESSURE
POSITION
DEVICE STATUS 2
ACCESS MODE
[1]
[2] or [4]
[2] or [4]
[1]
[1]
101
(65h)
Input
EXCEPTION STATUS
PRESSURE
POSITION
VALVE CLOSED / OPEN CHECK
4)
DEVICE STATUS 2
[1]
[2] or [4]
[2] or [4]
[1]
[1]
102
(66h)
Output
MODE
SETPOINT
3)
SETPOINT TYPE
LEARN
5)
LEARN PRESSURE LIMIT
ZERO
5)
[1]
[2] or [4]
[1]
[1]
[2] or [4]
[1]
1)Depending on DATA TYPE configuration (signed integer or floating point) the length may vary. DATA TYPE may be changed via Explicit
Messaging refer to «Explicit messaging setup commands» for details or via EDS file.
2)For data format details refer to «Explicit messaging commands».
3)PRESSURE SETPOINT or POSITION SETPOINT depending on related SETPOINT TYPE
4)0 = Valve is neither closed nor open, 1 = Valve is CLOSED, 2 = Valve is OPEN
5)To activate ZERO or LEARN use 1 as data else 0. Apply always correct procedures as described in «ZERO (setup step 4)» or «LEARN
(setup step 5)»