background image

4

FAS-402-CH/ FAS-602-CH Series Operating Instructions Ver. 1.05E

1  Package contents  ………………………………………………………………………………………… 6
2  Warning-caution label location and content  ………………………………………………………… 7
3  Operating precautions  …………………………………………………………………………………… 9

For safety operating …………………………………………………………………………………………………………………………… 9
For smooth operation  ……………………………………………………………………………………………………………………… 11
Other safeguards …………………………………………………………………………………………………………………………… 12

4  Outline of structure ……………………………………………………………………………………… 13
5  Proper operating boundaries for the FAS-402/ 602-CH series  ………………………………… 13
6  Major parts and function  ……………………………………………………………………………… 14
7  Proper use of the sealer  ……………………………………………………………………………… 15

7-1  Secure the work place ……………………………………………………………………………………………………………… 15
7-2  Install the foot switch  ……………………………………………………………………………………………………………… 15
7-3  Adjust the table height and angle  ………………………………………………………………………………………………… 15
7-4  Adjust the nozzle height  …………………………………………………………………………………………………………… 16
7-5  Set up the air source  ……………………………………………………………………………………………………………… 16
7-6  Plugging in the electrical power code  …………………………………………………………………………………………… 17
7-7  Turn ON the circuit breaker and power switch …………………………………………………………………………………… 17
7-8  Set an operating condition with the control unit  ………………………………………………………………………………… 17
7-9  Test sealing  ………………………………………………………………………………………………………………………… 18
7-10  Finish sealing  ……………………………………………………………………………………………………………………… 18
7-11  Turn OFF the circuit breaker and power switch  ………………………………………………………………………………… 18
7-12  Inspection after operation  ………………………………………………………………………………………………………… 18

8  Control unit setting and operation procedures  …………………………………………………… 19

8-1  Operate the machine with a pre-installed operation pattern …………………………………………………………………… 20

8-1-1  Sample operating procedures :  “seal only” operation  …………………………………………………………………… 21
8-1-2  Sample operating procedures : “manual sealing” operation  ………………………………………………… 22

8-2  Register sample operation patterns  ……………………………………………………………………………………………… 24

8-2-1  Sample case: how to register the “seal only” operation  ………………………………………………………………… 25
8-2-2  Sample case: how to register the “vacuum (timer) + seal” operation …………………………………………………… 26

8-3  Explanation of the terms …………………………………………………………………………………………………………… 27
8-4  How to set the control unit  ………………………………………………………………………………………………………… 28

 8-4-1  Seal counter  ………………………………………………………………………………………………………………… 29
 8-4-2  Select a desired operation number ………………………………………………………………………………………… 29
 8-4-3  Delete a registered operation pattern ……………………………………………………………………………………… 29
 8-4-4  Select / Enter / Change the sealing method  ……………………………………………………………………………… 30
 8-4-5  Set the heating temperature ………………………………………………………………………………………………… 30
 8-4-6  Set the heating time  ………………………………………………………………………………………………………… 31
 8-4-7  Set the cooling temperature ………………………………………………………………………………………………… 31
 8-4-8  Select the vacuum pattern  ………………………………………………………………………………………………… 32
 8-4-9  Set the vacuum time  ………………………………………………………………………………………………………… 32
 8-4-10  Set the vacuum level  ……………………………………………………………………………………………………… 33
 8-4-11  Select the maintenance mode  …………………………………………………………………………………………… 33

8-5  Operation procedures  ……………………………………………………………………………………………………………… 34

8-5-1  Seal only  ……………………………………………………………………………………………………………………… 34
8-5-2  Vacuum (manual) and sealing  ……………………………………………………………………………………………… 36
8-5-3  Vacuum (timer) and sealing  ………………………………………………………………………………………………… 38
8-5-4  Vacuum (gauge) and sealing ………………………………………………………………………………………………… 40

Table of Contents 

Содержание FAS-402-CH Series





































































Отзывы: