14
FAS-402-CH/ FAS-602-CH Series Operating Instructions Ver. 1.05E
6'56
1Power button
3XVKWRWXUQWKHSRZHU21RU2)):KHQFLUFXLWEUHDNHULV21
2 ENT button
Push to select the setting.
3 MENU button.
Push to display the MENU mode.
4 5 6 7 Arrow button
Press to display the each setting display or increase/decrease
the numeric value.
If you hold the button in, the numeric value will increase
or decrease continuously. Use this method when making wide
range changes in settings.
8 Liquid crystal display
Each setting item is shown on the digital display.
Follow the on-screen instruction to complete the setting.
9 Vacuum gauge
Vacuum degree is shown by the level meter.
10 Vacuum lamp
Turns on during vacuuming cycle
11 Heating lamp
The heating lamp turns on during heating cycle
12 Cooling lamp
The cooling lamp turns on during cooling cycle
6 Major parts and function
Control (switch) panel
Frame cover
Vacuum nozzle
Table
Air filter
Foot switch
Circuit breaker (with overheat proof circuit)
Circuit breaker is located
behind the dry filter. For the
detailed location, refer to
“10-2 Appearance dimensions
drawing.”
Control unit
1
2
3
4
5
6
7
8
9
11
10
Store any foreign
objects accidentally
taken in though the
nozzle in air filter cup.
Open the frame cover for the machine
maintenance.
The air inside the pouch is removed
through the vacuum nozzle.
The nozzle comes out at the
vacuuming process.
Angle of the table is
adjustable.
The circuit breaker automatically switches off
when the overheating or short-circuit occurs.
Press the foot switch to perform the
operation.
12
Regulator
Refer to "7 Proper use of the sealer"
for the detail.
Duct flange
Install the exhaust duct to the duct
flange.
