17
FAS-402-CH/FAS-602-CH Series Operating Instructions Ver. 1.05E
6'56
Be sure to connect the power plug directly into the wall
outlet with adequate current carrying capacity as
described at “10 Specification.” Insert the electric
power plug fully into the wall outlet.
1
Turn ON the circuit breaker.
2
Turn ON the power switch.
Built-in compressor and cooling fan will run.
Please refer to “8 Control unit setting and operating
procedures” for the detail.
7-6 Plugging in the electrical power
code
7-7 Turn ON the circuit breaker and
power switch
7-8 Set an operating condition with the
control unit
Warning
The power consumption varies depending
on each model. Check that the capacity of
the outlet is larger than the power
consumption of your machine, and plug it
directly to the outlet.
Using an outlet with a smaller capacity or
an extension cord will cause a drop in
voltage, resulting in malfunction and even
fire because of overheating of the cable
and outlet. Be sure to use an appropriate
outlet.
Warning
When you have changed the standard plug
provided, check the connection.
The wires are connected as shown in the
figure. When the ground wire is not
connected to the correct terminal, a short
on the power source side or an electric
leakage is caused.
220V specification
110V specification
Black
Ground
110V specification
220V specification
White
Ground
White
Black
Green
Green
