2
FAS-402-CH/ FAS-602-CH Series Operating Instructions Ver. 1.05E
Thank you for purchasing
the
FAS-402/ 602-CH series sealer!
FAS-402-CH, FAS-602-CH series is a table-top vacuum sealer controlled by the microcomputer, which makes it
possible to set up the various operation patterns that the customers require.
This manual explains the terms that is used when setting the seal conditions. Please read this manual thoroughly
before use for the better understanding on how to set up/operate the FAS-402-CH/FAS-602-CH series.
The setting range of heating/cooling temperature is indicated in both degrees Celsius and Fahrenheit. Please check
which unit your machine uses, and refer to the one that matches to your machine.
1. Set up the operation patterns
Two commonly-used operation patterns are pre-
installed to the machine at the time of factory
shipment.
Before starting the operation, please set up the
suitable operation patterns for your application.
Otherwise, you cannot operate the machine in the
way other than the pre-installed operation patterns.
You can set the operation patterns according to the
on-screen display of the control unit. Please refer to
this manual for the detail.
2. Seal test and optimum seal condition
There are many variations of package materials and
contents that the customers use. Please decide the
optimum seal conditions including heating
temperature, time, cooling temperature, as well as
the vacuum time (level) according to your needs
after properly performing the seal tests.
Please refer to the following table. It shows the
temperature of dissolution for each kind of film.
Please note that this value will be greatly affected
by the environment, thickness of package material
and other conditions.
Kind of packing
material
Temperature of
dissolution (
O
C)
HDPE
130-135
HPLDPE
105-120
LLDPE
120-130
PP
160
Kind of packing
material
Temperature of
dissolution (
O
F)
HDPE
266-275
HPLDPE
221-248
LLDPE
248-266
PP
320
