Van Der Stahl FAS-402-CH Series, Руководство по эксплуатации

Страница: 29 / 68

29
FAS-402-CH/FAS-602-CH Series Operating Instructions Ver. 1.05E
[ 01 ] SEALING ONLY
Change(number)
Change(item)
COUNTER xxxxx TEMP
MENU / / MENU=Back
1 Entry 2 Change
3 Delete 4 Maintain
[ 0 x ]
Select(number)
ENT=Delete
[ 01 ] SEALING ONLY
Change(number)
Change(item)
COUNTER xxxxx TEMP
[ 01 ] SEALING ONLY
Change(number)
Change(item)
COUNTER xxxxx TEMP
No.1 = SEALING ONLY
No.2 = VAC&SEAL timer
No.3 = VAC&SEAL manual
No.1 = VAC&SEAL timer
No.2 = VAC&SEAL manual
No.3 = Not registered
1 Push button when the display shows
one of the registered operation patterns as
below example.
(e.g. [01] SEALING ONLY)
The below menu display will be shown.
2
Place the cursor on “3 Delete” using ,
buttons and push to select. The
following display will be shown.
3 Select the operation number you want to
delete using the
, buttons.
4
Push to delete the selected number.
8-4-1 Seal counter
■
How to reset the seal counter:
Hold the button for 3 seconds when the
following initial display is shown on the screen.
■
How to reduce one count:
Push button one time.
1 The following explains on condition circuit breaker and the power switch are ON.
2 The numeric values on the control unit display is described as “xx”.
3 The cursor position is described as .
4 “ ” mark on the control unit display indicates the different contents by each operation number.
NOTES:
8-4-2 Select a desired operation number
Push or button when the display shows one
of the registered operation patterns as below example.
e.g.) [01] SEALING ONLY
Pushing the button will move the display to the
previous operation number. Pushing the button
will return the display to the following operation
number.
8-4-3 Delete a registered operation pattern
Attention
Be careful as the operation pattern
cannot be returned once deleted.
TIPS
When one operation number is
deleted, the following numbers will
move forward automatically.
TIPS
You can escape from this menu by pressing
the button. Please be careful as you
cannot escape after pushing the
button.
TIPS
If the registered number is only [01],
you cannot delete it.
When you try to delete, a message
"You can not delete all" will appear
on the display.
Example)
Before
After deleting No.1, Display changes as below: