VAMP VAMP 59, Инструкции по установке, эксплуатации и настройке

Страница: 19 / 212

Operation and configuration 2 Local panel user interface 2.2 Local panel operations
VM59.EN001 VAMP 24h support phone +358 (0)20 753 3264
19
2.2.3. Fault logs
All the protection functions include fault logs. The fault log of a
function can register up to eight different faults with time
stamp information, fault values etc. The fault logs are stored in
non-volatile memory. Each function has its own logs. The fault
logs are not cleared when power is switched off. The user is
able to clear all logs using VAMPSET. Each function has its
own logs (See Figure 2.2.4-1).
Figure 2.2.3-1 Example of fault log
To see the values of, for example, log two, press then ENTER
key to select the current log (log one). The current log number
is then indicated in the down-left corner of the display (See
Figure 2.2.4-2, Log2 = log two). The log two is selected by
pressing the RIGHT key once.
Figure 2.2.3-2 Example of selected fault log