VAMP VAMP 59, Инструкции по установке, эксплуатации и настройке

Страница: 123 / 212

Technical description 3 Supporting functions 3.7 Running hour counter
VM59.EN001 VAMP 24h support phone +358 (0)20 753 3264
123
3.7. Running hour counter
This function calculates the total active time of the selected
digital input, virtual I/O or output matrix output signal. The
resolution is ten seconds.
Running hour counter parameters
Parameter Value Unit Description Note
Runh 0 ...
876000 h Total active time, hours
Note: The label text "Runh"
can be edited with VAMPSET. (Set)
0 ... 3599 s Total active time, seconds (Set)
Starts 0 ... 65535 Activation counter (Set)
Status Stop
Run Current status of the selected
digital signal
DI
-
DI1…DIn
VI1...VIn,
LedA,
LedB,
LedC,
LedD,
LedE,
LedF,
LedG
LedDR
VO1...VO6 Select the supervised signal
None
Physical inputs
Virtual inputs
Output matrix out signal LA
Output matrix out signal LB
Output matrix out signal LC
Output matrix out signal LD
Output matrix out signal LE
Output matrix out signal LF
Output matrix out signal LG
Output matrix out signal DR
Virtual outputs Set
Started at Date and time of the last
activation
Stopped at Date and time of the last
inactivation
Set = An editable parameter (password needed).
(Set) = An informative value which can be edited as well.