5
On the Remote Control screen, press a remote control button which
will learn the original remote controller‟s button option.
It will load Learn Remote Control Button processing screen.
6
Press the desired original remote controller‟s button.
☞
Caution !
1)
You must press the original remote controller‟s button at least within 5
seconds as immediately as the screen moves to the learning screen.
2)
Make sure to press the button until a beep sound indicates the process
completion.
3)
Press the button a little bit hard, so that the button will be pressured with
enough strength.
7
When the learning process is successful, a beep sound and a
success message will be activated.
To continue learning other remote control buttons, press
[Continue]
.
To finish learning buttons, press
[Close]
.
Note
. If you press the
[Continue]
button, you will be redirected to step 6, so
that you can repeat the Button Learning process.
If the button study is failed, a failure message will be activated.
To try to learn the button again, press
[Retry].
To finish learning the button, press
[Close].
Note
1. When failed, press the
[Retry]
button to go back to step 6, and restart
the learning process.
2. Main reasons of button learning failure are highly related to the
cautions listed on step 5 and 7. Refer to the cautions, and try again.
3. If you learn the IR by
[2-Learn]
method, press the desired original
remote controller‟s 2
nd
button after completion of IR learning for 1
st
button immediately.
50
☜
