33
5
Configure IR output mode of selected remote control button through
the “IR Setting” screen.
■
Remote Control Button IR Setting Instructions
①
„IR Output Mode‟ Setting
1.
„Enable‟
Setting (Checked status)
This applies when the
[Repeat IR while button is pressed]
button
is activated. The IR signals will be output continuously as long as
the corresponding remote control button is pressed.
2.
„Disable‟
Setting (Unchecked status)
This applies when the
[Repeat IR while button is pressed]
button
is not activated. The IR signals will not be output continuously. Even
if the corresponding button is pressed and held, only the
„Default IR
Output‟
will be is transmitted.
Note.
The default status of all registered remote control buttons is that of
„Enable‟, meaning they are set to „Repeat IR while button is pressed‟.
②
„Default IR Output‟ Setting
1. This setting dictates the number of IR signals to be transmitted,
according to the number set in the box, when the corresponding
remote control button is pressed once.
2. The
[+]
,
[-]
button is used to set the number of times from a
minimum of 1 to a maximum of 255.
Note.
The default status of all registered remote control buttons is equivalent
to the current IR output quantity saved in the IR data of each individual
remote control button.
③
„Default‟ Settings
1. Pressing the
[Default]
button automatically sets the „IR Output
mode‟ and „Default IR Output‟ of the corresponding remote control
button to „IR Default settings‟ status.
2.
„IR Default Settings‟
Status
„IR Output Mode‟ : Continuous IR Transmission enabled
„Default IR Output‟ : IR Transmission 3 Times
6
To finish „Set Remote Control Button IR‟, press
[OK]
button.
7
To continue setting IR, press
[Yes],
or
[No]
to finish on the next
screen.
